ID # 19440960

Honda BF100

Call for Price
+ Freight and PDI

Our most powerful and most advanced technology in a mid-range outboard. Variable Valve Timing & Lift Electronic Control (VTEC®) automotive technology, Boosted Low Speed Torque (BLAST®), Multi-Port Programmed Fuel Injection (PGM-FI®) and High Performance Gearcase maximize performance, and with Lean Burn Control®, it can run on a leaner mix of air and fuel, making it very efficient.

The BF100A does not come with a propeller. Please consult with your Honda Dealer for propeller application assistance.



Sale Type
 Performance and Efficiency
Four-Stroke Design
World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil mixing.
Weighing in at only 163 kg (359 lb.), the BF100A is one of the lightest in the mid-range outboard class. It is the only 100 HP in this category.
 Honda’s Variable Valve Timing & Lift Electronic Control (VTEC®) system® provides power where and when you need it. VTEC® gives you a broader, flatter torque curve and smooth power delivery throughout the engine’s operating range. The result is a superior combination of power, torque and fuel economy. VTEC® is the modern replacement for displacement.
Programmed Fuel Injection (PGM-FI®)
Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.
Lean Burn Control®
Lean Burn Control® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 10% less fuel* than others in its class.
Based on EPA Specific Fuel Consumption Mode.
BLAST® System
Boosted Low Speed Torque, or BLAST®, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve aggressively. "Hole Shot" is vastly improved as more horsepower gets the hull up on plane quicker.
High Performance Gearcase
 Designed to get you going faster, this gearcase reduces drag, greatly reduces hull porpoise and minimizes spray, thus increasing acceleration and top speed.
    • A longer anti-ventilation plate helps trap water flowing to the propeller to minimize proposing, while a streamlined front and longer bullet reduce drag for enhanced acceleration and fuel efficiency.
    • A front splash plate reduces spray from the hull bottom, maintaining a dry deck above
    • And a 2.33:1 gear ratio affords the use of 13- to 14-inch diameter propellers for heavier loads.
Torsion Dampener
Sometimes called a flywheel, it is located near the base of the powerhead. This design lowers the center of gravity for improved handling.
SOHC 4-Valve/Cyl. Design
The BF100A’s powerful 1.5 L, 4-cylinder design utilizes a single overhead cam, and two intake valves to deliver maximum torque and power.
 Reliability and Durability
Legendary Honda Reliability
The technology we applied to our 100 HP outboard engine is the very same that powers one of the most popular cars in the world, the Honda Fit.
3-Way Cooling System
Three separate cooling systems keep the cylinder heads running cooler for long-term durability.
Engine Alert System
The Engine Alert System uses visual, audio and RPM reduction circuits to alert the operator of over-heating, low oil PSI and over-revving, preventing engine damage.
Corrosion Protection System
The Corrosion Protection System is a patented ""Double Sealed"" multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
Top-Mounted Electronics
The alternators, ignition and other critical electrical components are mounted near the top of the powerhead to stay cool and dry. The result? Dependable performance.
Sealed Starter
The starter motor is inverted into a sealed chamber that protects the starter drive from the elements.
Positive Lubrication
A crankshaft-driven, automotive-style trochoid oil pump ensures long-term durability of critical engine components.
Fresh Water Flushport
Flushes debris and saltwater out of the engine, extending the life of the outboard.
Ultra Low 3-Star CARB Emissions
Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards.
As a testament to their quality and reliability, all Honda engines come with a three-year, non-declining, non-commercial warranty or a one-year commercial warranty.
 Convenience and Ease of Use
Superior battery charging
There's always plenty of electric power with Honda's exclusive neodymium magnet flywheel. The alternator develops 44 amps in total and 35 amps of charging amps, it's twice the output of some competitors. It provides high output and keeps battery banks charged all day, even when running multiple accessories.
Centre Mount Tiller (with optional Multi-function Tiller kit)
The ergonomically designed tiller handle is longer for improved handling. Adjustments for throttle and steering friction allow easier control. Up front shift lever, PTT switch, variable speed control and engine alert lamps provide added convenience.
3-Position Tiller Handle
The 3-Position Tiller Handle (accessory item) adjusts to your comfort for easiest hull manoeuvrability.
Easy Maintenance
An easy "screw-type" valve adjuster system requires no shims, which reduces maintenance costs. Front-mounted oil filter and oil filler make for easy maintenance.
Built-in Pitot Tube(optional built-in Pitot Tube kit required)
Built-in pitot tube in the gear case eliminates the need to drill holes in your boat for installation.
Available in both 20- and 25-inch shaft models.
4-Stroke SOHC, VTEC; 4 Cylinder / 16 Valves
Through Prop Hub
Pressure Lubrication (Trochoid pump)
1,496 cc / 91.4 cubic in.
Oil Capacity
4.40 L (3.90 Imp. qt) with oil filter repl.
Bore & Stroke
73 mm x 89.4 mm (2.87 x 3.52 in.)
Fuel Delivery
Programmed Electronic Fuel Injection (PGM-FI)
Cooling System
Water Cooled
Ignition System
MicroComputer Programmed
Recommended Oil
Honda 10W30 FC-W™ outboard motor oil
Starting System
Full Throttle RPM Range
5,500-6,300 RPM
Gear Ratio
Gear Shift
Over Rev-Limiter
Power Trim & Tilt
Temperature Alert
Oil Pressure Alert
Speedometer Pickup
Water In Fuel Alert
Battery Charging Power
35 amp
Battery Condition Alert
Alternator (Electric Start)
44 amp
Variable Speed Trolling Kit
Overall Width
459 mm / 18.1 in.
Transom Height (L-Type)
537 mm / 21.1 in.
Transom Height (X-Type)
664 mm / 26.1 in.
Propeller Type
dry weight
166 kg / 366 lb.
172 kg / 379 lb.

Can't find what you're looking for?

Let us help

Let us know what you're looking for and one of our knowledgeable team members will contact you with more information.

Contact Information


My Cart - items